Xitanium

LED driver

Datasheet

Xitanium LED drivers – linear HV non-isolated

Xitanium 36W 0.12-0.4A 115V 230V

Enabling future-proof LED technology

Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as down lighting and

spot/accent lighting.

Reliability is enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal

de-rating. Most drivers feature central DC operation.

In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED

drivers, flexibility in luminaire design is assured thanks to an adjustable output current. Application-oriented operating windows offer the

flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand.

Benefits

• High reliability underpinned by 5 year

warranty

• Future-proof flexibility -

application-oriented operating

windows enable LED generation and

complexity management

• Compatibility - adjustable output

current enables operation of various

LED solutions from different

manufacturers or OEM own designs

• Flicker and noise free dimming with all

Touch and DALI LED drivers due to

amplitude dimming (AM)

Features

• Up to 95% efficiency, lowest cost and smallest

dimensions

• Operating windows - output current can be adjusted

via the Philips MultiOne configurator (TD drivers) or

with a resistor outside the driver

• Reduced ripple current and thermal de-rating for

increased reliability

• Multiple versions - DALI dimmable & programmable,

1-10V dimmable, and fixed-output;

• All T5 form factors but various lengths

• Longer life time (100khrs), improved surge and burst

(4kV) and Tambient (-40°C to +60°C) specifications

Application

• 17W, 36W and 75W LED drivers for

office applications

• 110W and 150W LED drivers for

industry, warehouses, public areas,

distribution centers and shopping

malls

November 2016

Electrical input data

Specification item Value Unit Condition

Nominal input voltage 220...240 V

performance range

Nominal input frequency 50...60 Hz

Nominal input current 0.17 A @230V @ full load

Input voltage 230 V

Nominal input power 40 W @230V @ full load

Power factor ≥ 0.9 @ full load. See graph.

Total harmonic distortion ≤ 20 % @ full load. See graph.

Efficiency 91 % @230V @ full load

Nominal input voltage DC 186...250 V

Nominal input current DC 0.19 A Input voltage 230 V

, full load

Input voltage AC 202...254 V

Operational range

Input frequency AC 47.5...63 Hz Operational range

Input voltage DC 168...275 V

Maximum permissible range

Isolation Input to Output No

Electrical output data

Specification item Value Unit Condition

Regulation method Constant Current

Output voltage 50...115 V

Output voltage max. 330 V Peak voltage at open load

Output current 0.12...0.4 A Full output current setting

Output current tolerance ± 5 %

Output current ripple LF ≤ 4 % Ripple = peak / average

Output power 10...36 W Full output

Electrical data controls input

Specification item Value Unit Condition

Control method Fixed

Logistical data

Specification item Value

Product name Xitanium 36W 0.12-0.4A 115V 230V

Order code 871869644000100

Logistic code 12NC 9290 009 50606

EAN3 8718696440018

Pieces per box 24

2 / 7 Xitanium 36W 0.12-0.4A 115V 230V November 2016

Wiring & Connections

Specification item Value Unit Condition

Input wire cross-section 0.5...1.5 mm

WAGO744, solid wire

16...20 AWG WAGO744, solid wire

Input wire strip length 8...9 mm

Output wire cross-section 0.5...1.5 mm

WAGO744, solid wire

16...20 AWG WAGO744, solid wire

Output wire strip length 8...9 mm

Maximum cable length 4000 mm Total length of wiring including LED module, one way

Insulation

Insulation input output

input Non

output Non

Dimensions and weight

Specification item Value Unit Condition

Length (A1) 280 mm

Width (B1) 30 mm

Height (C1) 21 mm

Fixing hole diameter (D1) 4.1 mm

Fixing hole distance (A2) 265 mm

Weight 185 gram

3 / 7 Xitanium 36W 0.12-0.4A 115V 230V November 2016

Operational temperatures and humidity

Specification item Value Unit Condition

Ambient temperature -25...+50 ºC Higher ambient temperature allowed as long as Tcase-max is not

exceeded.

Tcase-max 75 ºC Maximum temperature measured at T

case

-point

Tcase-life 75 ºC Measured at T

case

-point

Maximum housing temperature 110 ºC In case of a failure

Relative humidity 10...90 % Non-condensing

Storage temperature and humidity

Specification item Value Unit Condition

Ambient temperature -25...+85 ºC

Relative humidity 5...95 % Non-condensing

Lifetime

Specification item Value Unit Condition

Driver lifetime 50,000 hours Measured temperature at T

case

-point is T

case

-life.

Maximum failures = 10%

Programmable features

Specification item Value Remark Condition

Set output current (AOC) LEDset See Design-in guide. Default output current: ≤ 120 mA

LED module temperature derating (MTP) No

Constant Lumen Over Lifetime (CLO) No

DC emergency dimming (DCemDIM) No With a DC mains the output current is equal to the AOC value

Corridor mode No

Energy metering No

Diagnostics No

4 / 7 Xitanium 36W 0.12-0.4A 115V 230V November 2016

Features

Specification item Value Remark Condition

Open load protection Yes Automatic recovering

Short circuit protection Yes Automatic recovering

Over power protection Yes Automatic recovering

Hot wiring No

Suitable for fixtures with protection class I per IEC60598

Certificates and standards

Specification item Value

Approval marks CCC / CE / ENEC

Ingress Protection classification 20

Inrush current

Specification item Value Unit Condition

Inrush current I

peak

14 A Input voltage 230V

Inrush current T

width

250 µs Input voltage 230V, measured at 50% I

peak

Drivers / MCB 16A type B ≤ 33 pcs

MCB Rating Relative number of LED drivers

B 10A 63%

B 13A 81%

B 16A 100% (stated in datasheet)

B 20A 125%

B 25A 156%

C 10A 104%

C 13A 135%

C 16A 170%

C 20A 208%

C 25A 260%

Driver touch current

Specification item Value Unit Condition

Typical touch current < 0.3 mA peak Acc. IEC61347-1. LED module contribution not included

Surge immunity

Specification item Value Unit Condition

Mains surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us

Mains surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us

DALI surge immunity (comm. mode) kV DALI - L/N/Ls acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us

5 / 7 Xitanium 36W 0.12-0.4A 115V 230V November 2016

Graphs

Operating window

Power factor versus output power

6 / 7 Xitanium 36W 0.12-0.4A 115V 230V November 2016

Efficiency versus output power

THD versus output power

in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No

liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or

other industrial or intellectual property rights. Data subject to change.

Date of release: November 23, 2016